A65 cam shaft gear.

Started by Mike Farmer, 16 Mar, 2023, 10:54

Previous topic - Next topic
Print
Go Down Pages1
User actions

Mike Farmer

16 Mar, 2023, 10:54
 :) :) :)

Greetings.

I have a slight problem here. I cant get my Cam shaft gear onto the shaft even with judiciuos application of FBH. Seriously gently.

Were there two different cam shaft gears, I know the cam shaft is the correct part No. OR is there an almost identical item from another Bike

Mike 8) 8) 8) 8)

Thank you

Spaceman

#1
16 Mar, 2023, 12:12
Same parts numbers at least 62-70. Have you measured the pinion ID and shaft OD to see how much interference there is?

Mike Farmer

#2
18 Mar, 2023, 15:33
 :) :) :)

No Not mejurred. But my initial reaction is that there is a lot of seriously tight. i have still to ascertain whether either item is danage flawed then I guess we'll see. May just have to get bigger FBH; hope not. At the moment it is a long way down importance road.

Mike 8) 8) 8)

Mike Farmer

#3
20 Mar, 2023, 18:05
 :) :) :) :)

After very serious examination with magnifying glass the keyway on the shaft was very slightly "lipped". Defo not sufficient to see with "my" naked eye. So a few minutes with 150 grade WaD, solved.

Mike 8) 8) 8)
Print
Go Up Pages1
User actions