Oil capacity of 69-70 Shuttlevalve forks

[TRFell]

Could anyone please tell me how much oil to put in each fork leg?
The forks are l believe A65 1969-70 shuttlevalve type
Cheers Tim

[ChrisG]

The manual says 190cc. (3/8 US pint).
However, a little bit over helps if the forks 'clunk' at the top of the rebound. This is because, if too low, the two small bleed holes at end of the stanchion move into air space and don't do there job as a 'final damping'. (Well, that's my take on it. Other opinions would be welcome).
Hope this helps.
ChrisG