A10 plunger forks

[topher]

Can someone confirm this is the correct orientation of the fork seal please - "open" face pointing down. Thanks

[Roy]

Other way round,

[rhyatt]

Always remember,
Spring towards the oil

This applies everywhere, just imaging the spring coil keeping the wiping lip tight on the shaft in the middle.

So in your case , spring down to keep the oil in the bottom fork leg

[topher]

Always remember,
Spring towards the oil

This applies everywhere, just imaging the spring coil keeping the wiping lip tight on the shaft in the middle.

So in your case , spring down to keep the oil in the bottom fork leg

That's a bit confusing because to me the spring is down in the picture. But I'm guessing as per the previous answer you're both saying it should be the other way.
Thanks both.

[Roy]

I stand corrected you do have it the right way round, I couldn't see photo very well ,I now see your image is the for seal holder ,( at first it look light bottom slider , my apologies )

[topher]

I stand corrected you do have it the right way round, I couldn't see photo very well ,I now see your image is the for seal holder ,( at first it look light bottom slider , my apologies )

Sorry not a great photo. Yes that's the end of the seal holder as it would be screwed onto the top of the slider. Thanks again.