Con rod & Big/Little end assy wanted

[PaulG]

Hi All,

Where could I buy a new con rod assembly for my '53 D1 ?

The gudgeon pin I have in my new piston (re-bore) is 12mm. The old one in the damaged piston was also 12mm.
Apparently some early D1's had a smaller gudgeon pin.

The big end pin that I pressed out of the flywheel is 19mm (or 3/4")

See photo.

Thanks in anticipation,
Paul G

[AdrianS]

Have you tried Rex Caunt ?

[bluebell]

do you have an adjustable reamer? is your big end good  as i may have a new small end in my bits  chris  07901735443   swansea