b31 alternator help wanted

Started by EDDIE SIMPSON, 24 Jan, 2021, 00:34

Previous topic - Next topic

EDDIE SIMPSON

hello, can anyone with an alternator b31  help me with correct coil location . a photo would be most welcome.

paulm


EDDIE SIMPSON

thanks paul . i suspected it went there. my next question is what does the black and white wire at the ignition switch connect to on emergency start position?
in can only think of it acting as a return to the earth at the alternator via the prs8 ignition switch. not used with ign on position.

JulianS

Dont know if this circuit diagram will assist.

Second photo shows schematic of the 6 volt setup for EMG position.

EDDIE SIMPSON

thanks julian, i did conclude what the last drawing showed; charging the coil - and points + earth return to all 3 coil circuit of the alternator. i have the first drawing but i think its drawn wrong with in reality 15 16 and 17  all connected in emerg start.
however i ve gone 12volt but just had to know what that extra black and wire was for.