Fork gatters

[mo goldie]

Hi

I want to change my fork sleeves from the metal ones to rubber gatters but how will the gatters hold underneath the bottom Yolk as the spring will be there or is there some sort of sleeve that go`s there if so where would i get some from, any help would be great.

Regards

MO   

[chaz]

Ahh, now theres a thought I hadnt thought of!!
The A50 chop has open springs that were yellow, same as bike. now getting coated black , the new bike colour. bought a pair of heavy duty gaiters to go over them, but not thought about ties. black cable ties match , stainless look good but yes, they will ride up!!! cr@p.
the bottom slips over the seal holder and the lip at the top and a cable tie stops it riding up but the top is held at the top by friction and a tie.
If you mean the upper sleeves , mine are chrome tubes not headlamp ears, they should stay in place with ties. 

[Bess]

Hi,
    I have these adaptors which worked fine on a A65. Cant remember where I got them or for which bike, I can give you a drawing if you want to get them made. Probably best to measure your application though

Best wishes

[geraldhattrick75]

The fork shrouds on my 1965 (-ish) Lightning extend below the lower yoke, giving something for the gaitors to grip on....