Snap connector tool

[Blackthou]

Yes, thanks for the explanation.

[Phil C]

Fitting bullets to the connector is much easier with the tool! Received in post today, worked fine. I was a little bit surprised that the dia of the bullets on the short wires on the socket was about .004" (4 thou) different from the bullets I have which I fitted to the loom wires. Anyway, all seems okay. Thanks again.  Phil
Phil

[Blackthou]

That's good service. Well done. Onwards and upwards now then.

[BeenyBoy]

No problem at all. All bits can be bought separately. Here's a picture of the insertion tool.

I wouldn't recommend this one- the ends bend after a couple of uses- go for one of these....

https://www.vehiclewiringproducts.co.uk/p-336-bullet-closing-tool?search=bullet%20%20tool

[Phil C]

The one you recommend is the one I got, thankfully. Phil

[Blackthou]

That certainly looks more up to it.