A10 oil pump

[thunderboltandlightfoot]

Hello , Asking for info on torque settings for the worm drive for the oil pump on A10 1960,
the length of bolt would be good ,
                                                  many thanks .

[Bess]

Hi,
    I don't think there are any specified.

I use the A50/65 setting which for the 9/16" BSC, 20 TPI. In the 60's it was 28/30 lb/ft and changed to 35 lb/ft in May of 1970. Not sure which bolt length you require.

Best wishes...