Screw size please

[ROYC]

Does anyone know what size the screws are that hold on the rubber knee pads ?

[Mark]

Hello Roy,

What bike is it & what is the part number?

Attached is a spreadsheet in excel format if you use the find function in excel & type in the part number or tank this may help you & hopefully other members of the forum.

Best Regards Mark

[ROYC]

Hi Mark,
My bike is in my signature (1958 A7SS)
I don't have excel.
Part No. could be 24-7178

[JulianS]

The screw is part 2 -79. You can see it as 48 on plate 12 of the 1958/59 parts book.

Below is also from the parts book and gives the dimensions of the screw. Note 1/4 CEI is interchangable with 1/4 BSF.

[DWS]

Hello Roy,

What bike is it & what is the part number?

Attached is a spreadsheet in excel format if you use the find function in excel & type in the part number or tank this may help you & hopefully other members of the forum.

Best Regards Mark

Hi Mark,

What models and period does the excel bolt list cover please?

Dave

[ROYC]

1/4 BSF, thanks for that Julian.

[Mark]

Hello Dave,

I sourced the list from the internet & I think it covers various models as it was titled BSA fasteners.

I just find it quicker to use the find function using the part number to find the required info & then print off  just the parts needed before I visit my supplier, although as you can see not all information is complete.

Mark

[DWS]

Thanks for that Mark, very useful.