BSW Stainless cap head screws.

Started by Pete B31, 27 Oct, 2026, 08:25

Previous topic - Next topic

limeyrob

The things that matters are making sure there are no sharp edges on the thread as the stainless is hard and will cut the ally.  There are a lot of poor quality stainless fasters about. Secondly keeping water out so packing in grease works.  I also have a Land Rover with an ally body that lives outside, stainless fasteners on the ally are a no-no and you see the corrosion after a year of so. Plated steel is best if there's any chance of condensation.  The rear trouble is if damp gets down the thread, then the thread weakens in the casting and unscrews with the bolt.  The big enemy here is a damp shed with condensation.

Tigerfeet

Ray Box Engineering has supplied lots of my similar fasteners. Seems to be easy to find on eBay.