Old iron horse

[Steve 80]

1955 b31 first time out after rebuild.

[V500]

Very nice too.
If I was you I'd cut the end off the k/s rubber and push it fully home or you'll be forever pushing it back on after three kicks.

[Steve 80]

Good advice,had that problem with my triton forever pushing it back on,finally cut end off and tied with locking wire no probs after that.

[DAVE BRADY]

Hi,

If you buy the open end rubber and drill and tap a 1/4" BSF hole about 1/2" deep and use a nice stainless screw and washer. Something like this.

Dave.

[Steve 80]

That's a good idea 💡 will probably do that,
Thanks Dave and v500 for suggestions,these little things make a big diferance,

[idie]

That's  what I did to my bikes. Got fed up with the rubber shooting off.