C15F centre stand

[A7JAY]

Hi all

does any one know if there's a longer centre stand that will fit on my C15F? It's about an inch short due to me fitting longer rear shocks, I know I could extend the one I have by welding a piece in either leg, or adding to the feet but just wondered if there's a longer one that just bolts on.
thanks   

[A7JAY]

just to add the angle is fine and not leaning to far forward

[iansoady]

I'll be removing the centre stand from my 1969 Starfire frame as I'm fitting a sidecar. The rear wheel is about 3" off the deck when on it (which needs a hefty pull). You're welcome to it for the price of postage and a pint, but it will be a couple of weeks before I take it off.

[A7JAY]

Hi Iansoady many thanks for the offer sir,  will that centre stand fit the C15?

[iansoady]

Can't guarantee it but as far as I know the mountings are the same for the C15 and my slightly later frame. Others with more knowledge may chip in?

[Stubaker58]

The B40 stand is longer than the C15 one to make up for the 18" wheels (C15 on 17"??)

[iansoady]

I could give you a rough measurement from the pivot centre to the foot if that helps. My bike has 18" wheels.

[rhyatt]

my C15 frame lugs - as best as I can  - are 14mm apart (where the stand goes in to)

[A7JAY]

I could give you a rough measurement from the pivot centre to the foot if that helps. My bike has 18" wheels.

if you could please Iansoady

[iansoady]

It's about 9.5 - 10". Hard to measure exactly. I'll be taking it off before Christmas hopefully.

[A7JAY]

It's about 9.5 - 10". Hard to measure exactly. I'll be taking it off before Christmas hopefully.

Hi when you do could you take a photo please

[iansoady]

Will do.

[iansoady]

Photo:

[A7JAY]

Hi Ian there doesn't seem to be a photo there mate

[V500]

I can see it?