B31 '54 Plunger - Side Stand

[Fraz]

Fraz
Here is a photo of the side stand on my 1949 B33 with a plunger frame. It should be the same as your B31.

The rear clamp half is brazed or welded to the frame. The center of the clamp is about 2.25 inches rear if the boss that the brake pedal is mounted to.

Hope this helps.

Jim

What is the length of your side stand please?
(Measured from the pivoting pin to the foot)

Many thanks

[Jim S]

8.5 inches from the pivot to the foot.

Jim

[Fraz]

8.5 inches from the pivot to the foot.

Jim

Thank you