Split metering pin

Started by AdrianS, 30 Sep, 2020, 17:23

Previous topic - Next topic
Print
Go Down Pages1
User actions

AdrianS

30 Sep, 2020, 17:23
In preparation for my engine strip, the WSM mentions a split metering pin in the oil supply to the rockers.
I have searched and cannot find any diagrams of it or description other than calling it a split metering pin.
Can anyone enlighten me and explain how to check or replace it or is it patently obvious when I start to dismantle?

Ian C

#1
30 Sep, 2020, 18:37
Assuming an A65? Please see attached.. It is as described, a split pin fed through the rocker oil delivery pipe and held in place to meter the oil flow. Crude but effective..

AdrianS

#2
30 Sep, 2020, 20:55
Cheers
I am sure it will become clear when i strip the head.

Nanonevol

#3
01 Oct, 2020, 16:35
You have a parts manual, yes?  It's 60-2684

AdrianS

#4
02 Oct, 2020, 07:22
It doesn't show one for the early A50/65 on the Draganfly site.

Mike Farmer

#5
02 Oct, 2020, 09:45
 :) :) :)

My A50 engine is Dec1962 and it has one. Of course there is nothing to say that its the original head

Mike 8) 8) 8)
Print
Go Up Pages1
User actions