ANOTHER BSA B25 TIP

[JOHN KAY]

 HI GUYS

  AN EASIER BUT TIME CONSUMING WAY TO REMOVE B25 FLYWHEELS IS TO USE A SERIES
OF SHORT NUTS AND BOLTS SPACED ROUGHLY EQUIDISTANT AROUND THE FLYWHEEL SPACE
BETWEEN THEM AND GRADUALLY UNSCREWING EACH OF THEM . THE FLYWHEELS SHOULD THEN
START COMING APART AND AS THE SPACE BECOMES WIDER USE SLIGHTLY LONGER BOLTS .
IF YOU JUST WANT TO REMOVE ONE FLYWHEEL THEN JUST LEAVE THE FLYWHEEL BOLTS IN ON
THE OTHER ONE > SIMPLE BUT EFFECTIVE > I USE M8 BOLTS WITH 13 mm SPANNER FOR
CONVENIENCE >  ANY COMMENTS WELCOME REGARDS JOHNBOY