QD Hub

[BANHAM]

Has anybody experienced problems with the mating of QD hubs. I have QD hub on my B44SS which was extremely difficult to part and now after a good clean of the splines I can only get about half engagement. Any idea's guys

[Bees]

Can you get it together without the spindle in?

Had a problem with mine. Turned out it was a bent spindle.( the longer one)

[A10 JWO]

Give the surfaces a good clean with gunk and put some copper grease on it.

[BANHAM]

Makes no difference with or without the spindle. Not sure if it's the male spline or the female spline that needs attention.

[Bees]

I know not much help but it has to be a problem with the splines. I suppose the tiniest burr will jamb it.

A bit random. But did BSA make more than type of QD hub and you've got a mismatched pair that someone has forced together in the past?

You never know what may have happened over the years

[BANHAM]

That's a good point, is there any body out there that might know?