BSA B33 Engine Oil Gauge mounting

[LEMMY69]

Hello

I would like to indicate the Oil preasure from the BSA B33 Engine.

Is it possible to drill a hole with a thread at the side cover to  mount a Oil Gauge somewhere at the handlebar.

Lemmy69


l

[ANDY HIGHAM]

There is very little oil pressure on a B33, probably won't even register on a gauge. It is a Roller bearing engine so its oil flow rate that matters

[LEMMY69]

ok thank you

so  there will be no gauge.

would you recommend a Magnetic OIL Drain Screw in the lower Oil plate.

I  just want to provide the engine of damage.

regards

Lemmy

[Dean Southall]

The magnetic oil drain plug is very worthwhile. As much to provide an easy way to check/drain excess sump oil if the bike has been standing for a while as to attract ferrous impurities,.