B31 Rear Wheel Spindle

[Mark B]

I'm having problems finding one for a rigid B31; I've tried Draganfly, Burton Bike Bits and C&D with no luck.  Can anyone recommend any other sources? (The B31/33 is my first BSA since my Bantam in the early 80s, so I'm still finding my way around these things!)

Thanks, Mark. 

[JulianS]

Have you tried Autocycle?

Or Bantam John, Sheffield British Motorcycles?

If you have exhausted the UK suppliers try the USA;

https://www.baxtercycle.com/product/65-6161/

[Mike Farmer]

Hi 

You might find it quicker to borrow one as a pattern and have one made.
Incidently, when I do this I have a couple made cos once someone sets up a lathe an extra is really not very expensive,

Best of

Mike

[Mark B]

Thanks for the replies; the search continues...

[Mike Farmer]

Hi.

I have just found a spindle in amongst my bits. It is most probably BSA but I don't have a clue which one. Definitely Not A series. If you can let me have your required dimensions I'll check it out to see if its any good to you. As far as I can see its brand new and I vaguely remember buying it in error some time back in the Roman ages. (But then everything is "vaguely" so it could have been last week)

Mike

[Mike Farmer]

Hi

Brief follow up. The spindle that I have is  7:1/16th long   and 11/16th diameter. Thread =22TPI. If you think its right and want to try it  I'm happy to send it for the postage. If its not what you just send it back. I'll have a quick check around for a sensible equivalent price.

Mike

[Mark B]

Thanks Mike, PM sent.