A65 OIF Wiring

[A10 JWO]

Work is progressing onto the electrics. I fitted the Lucas switches on the handlebars and the looms on these are so long they would almost reach the oil filler cap. Has anyone got a decent photo of one these with the tank off showing the wiring locations. Please bare in mind I bought this bike in bits, so I never took this apart. I read somewhere that the main loom connects behind the fork tube. I have a brand new Lucas main loom which matches all the colour codes ( Thank Christ ) 

[CROFTY1984]

Hi, I hope this works. You can zoom in quite far on the original. I can email it if you want, just PM me your address.
Dan
https://drive.google.com/open?id=1_ie163rHiZsEVynzVdrIzR4FZrdHwwo-4A
OK, the IMG tags didn't work, but the link does I think.

[ChrisG]

Yes, they connect into the main loom and headlamp loom at the point above and just forward of the engine. I tried to be clever and fitted them in the headlamp itself but there isn't enough room and it was a bloody nightmare. So I reverted back to the factory method!
Chris

[A10 JWO]

Thanks Lads. Crofty, the photo really helps, either way it is going to be a Spaghetti jobby.  Was probably a lot easier on a production line. I will fit and test mine before the engine goes in.

[A10 JWO]

Can anyone tell Crofty or me what the two tubes are welded to the front of his frame, see picture in this thread, thanks.

[JulianS]

Tubes possibly built in ppints for fairing mounting.

[AWJDThumper]

They are fairing mounts which were fitted in the late 1960's early 1970's to a number of BSA bikes, including non-OIF B25 and B44 bikes.

[A10 JWO]

Thanks lads.