BSW Stainless cap head screws.

Started by Pete B31, 27 Oct, 2026, 08:25

Previous topic - Next topic

Pete B31

I'm trying to find Whitworth socket cap head screws in stainless steel. I have seen some kits, like the ones at Feked. But I wondered if there is a bolt supplier selling them individually.

Thanks
Peter.

Greenfield

Acmestainless do 1/4"W cap heads but not sure if they do other diameters.

NClark

Spalding Fasteners have good stick and may be able to help:

Fasteners UK | Nuts, Bolts, Screws & Fixings | Spalding Fasteners https://share.google/3yC0UvCUlk3pXYU3U

Nigel

DAVE BRADY

Hi,

Try Middleton Stainless. Not necessarily the cheapest but the products are top quality.

Dave.

V500

Quote from: Pete Lamb on 27 Oct, 2026, 08:25 I'm trying to find Whitworth socket cap head screws in stainless steel. I have seen some kits, like the ones at Feked. But I wondered if there is a bolt supplier selling them individually.

When you say "Whitworth" do you actually meaning "Whitworth"?
Grandma's eggs and all that, buy to too many people (particularly Americans) "Whitworth" is the generic term for Imperial.

iansoady

Purists will object but BSW and UNC 1/4" are essentially interchangeable unless for very high stress applications. Both are 20 tpi but the thread angles are diggerent at 55 and 60 degrees respectively, as well as some trivial differences in thread profiles.
Ian.
1964 Norton Electra
1969 BSA / Suzuki DZR400 / Steib S501
2016 Herald Classic 250

Pete B31

Quote from: Greenfield on 27 Oct, 2026, 09:08 Acmestainless do 1/4"W cap heads but not sure if they do other diameters.

Thanks. I will try them. It's 1/4" I need.

Pete.

Pete B31

Quote from: V500 on 27 Oct, 2026, 09:48
Quote from: Pete Lamb on 27 Oct, 2026, 08:25 I'm trying to find Whitworth socket cap head screws in stainless steel. I have seen some kits, like the ones at Feked. But I wondered if there is a bolt supplier selling them individually.

When you say "Whitworth" do you actually meaning "Whitworth"?
Grandma's eggs and all that, buy to too many people (particularly Americans) "Whitworth" is the generic term for Imperial.

Thanks. They are for the primary cover on the '56 B31. I was assuming they're Whitworth, but I could be wrong. Are they UNC?

This is my first Brit bike in 47 years of riding, so I'm on a steepish learning curve.

Pete.

Pete.

Pete B31

Quote from: NClark on 27 Oct, 2026, 09:09 Spalding Fasteners have good stick and may be able to help:

Fasteners UK | Nuts, Bolts, Screws & Fixings | Spalding Fasteners https://share.google/3yC0UvCUlk3pXYU3U

Nigel

Thanks Nigel. That's a useful contact.

Pete.



limeyrob

They will be Whit, you can check the club list of fasteners.  1/4 BSW cap-head are quite common so you should be able to get stainless.  I prefer plated steel as its less reactive to the ally castings.
Stainless is not a nice material when screwed into cast all, the best is galv steel or plated.

Derek996

If using atainless screws in an alloy casing lubricate them with Alumslip
1948 BSA ZB32 Competition
2015 Ducati Scrambler Classic

martinh10

Never had the slightest problem with stainless screws in aluminium alloy.

iansoady

Neither have I. I usually put a small dab of ordinary grase on them though. I don't like copaslip as it smears everywhere.
Ian.
1964 Norton Electra
1969 BSA / Suzuki DZR400 / Steib S501
2016 Herald Classic 250