B40 SS90 oil leak

Started by HOADLEY, 01 Feb, 2025, 12:11

Previous topic - Next topic

HOADLEY

I hope you can tell me what this hole is for because I have been unable to find any information on what it there for there is oil coming out which doesn't seem right so will be please for help thanks.Del

Rupert

Oil coming out of that hole is a sign that the engine has "wet sumped" and that oil has built up inside the engine above the level of that hole - so it seeps out through it. The correct function of that hole is to allow any build up of oil under the outer cover (mostly blown out through the Camshaft breather) to drain back into the engine when the normal working level of oil inside the engine is much lower.

HOADLEY

Thanks for that I will check that the ball is seating probably causing it to wet sump .Del👍

rhyatt

How long has the bike been unused for?

HOADLEY

I have had it standing for a year.

rhyatt

OK
Just crack off the sump plate and drain oil in the sump.
Recycle it back to the oil tank
Now start it and look into oil tank and observe oil returning after a little while.
No need to fiddle with ball valves

Regular use will prevent reoccurrence

HOADLEY

Ok thanks for the all the help I will see how it goes .Del