Rebore and cranckshaft services

[SUPERGRUMPS]

Hi, can anyone recommend a specialist company that can do rebores (and supply new piston) as well as crankshaft grinding etc. for a c15 engine

[Greybeard]

I used Draganfly as the supplier for pistons for both my B31 and Ariel 350. The bore for the B31 I had done at a local engineering firm (since gone under after nearly 100 years    ). The Ariel barrel was done by Draganfly. They charged only 35 quid for that whereas the engineering firm was 75.
I had thought that the Ariel barrel needed sleeving as it was badly scored but they checked it and rang back with the good (ie cheaper) news.
I sent the barrel by post to Draganfly. I forget the cost but Im sure it was well under 20 quid. The expensive bit was collecting it as I was in the area - I finished up blowing over 400 quid on some nice new panniers etc for my AJS 650 

Steve

[SUPERGRUMPS]

thanks Steve, will ask them for a quote

[SUPERGRUMPS]

Contacted Dragonfly, they do not service (Pressed) crankshaft assemblies, anybody know who does