How not to B33!

[Dan_B33]

I think I managed to assemble for trial.
All gears engage okej.
I have this "unknown selector" from eBay.
Will post later side by side with welded one.
Looks like I have more luck than wisdom....

[Dan_B33]

Some picture

[Dan_B33]

So, I will confirm if that selector works dynamically on the bikelater.
So far this is good hint for the future if you approach one cheap on eBay....go for it( if you are risk hungry).

[Dan_B33]

You can see on the picture selector which is engaging 4th has bigger pin and wider groove...still selects all gears ok.
Someone might know why they made it different?
Or that is some some garage made part?

[Dan_B33]

Here they are both.

[GLENN]

I've seen 2 small pins or 2 large but never a combination.  Perhaps someone changed a selector fork at some stage?  Does the large one look tampered with on the other end? 

Keep up the good work!

Glenn

[Dan_B33]

Hello,
Thank for the good words!
The big one is not tempered. The only difference that it is not drilled underneath....and bigger groove and pin.

[Dan_B33]

No the best template for inner case gasket from Faked.uk.
Some extra hole in it ? Or my gearbox is different?

[Dan_B33]

Looks like gearbox main case fits to the template!
Means one bolt less?

[Dan_B33]

I'm about to put clutch together. I went for non surflex plates.
Old school says cork plates shall be soaked in oil befor assembling.
Is that the case wit this one's?

[Dan_B33]

I hope you are I'm not boring?
What is going one wit the clutch sleeve?
Look like mine old worn is bigger.
The second hand one is not seated on the shaft far enough .
Is there way to machine that? Or what would be the part I need?

[Dan_B33]

Can someone just confirm that fo blue arrow indicated sleeve 65-3873?

[Derek996]

The clutch sleeve comes in 3 different sizes.
42-3107 https://draganfly.co.uk/shop/66604/sleeve-clutch/#42-3107 Fits 1956 onward s/a models.
65-3873 https://draganfly.co.uk/shop/72978/clutch-sleeve-sold-complete-with-collar/#65-3873 I think this should fit your bike.
65-3930 https://draganfly.co.uk/shop/72991/clutch-sleeve-na-1596689378/#65-3930 This fits my bike. I'm surprised it is still available.

[Dan_B33]

Thanks Derek!
I need middle one for sure. Good shape...or new.
Now I have first one good shape and ruined middle one 65-6873

I have already asked Dragonfly how long I need to wait for that one in case of a order.

If anyone has one :65-6873 spare? Gladly will buy if in good shape

[Dan_B33]

Reply from Dragonfly - no suppliers 30weeks plus waiting!
Anyone has it stock?