1934 clutch spring.

[David Samways]

The clutch spring (15-350, but probably the same as 15-301) has brocken on my '34 Blue Star (see pic). I've robbed the one from my L32-3 project for now, but need to replace it.

I see that Cornucopia have replicas, but it's a PITA getting anything from Europe now, so I'd rather find one in the UK. Any leads?

OD 1.7"
ID 1.2"
L 1.5"

David

[David Samways]

I should have added that I can probably get one made locally, so if anyone else needs one I can get a few made. Rather not go down that route if there's a readily available replacement though.

[idie]

Aren't they the same as an M20. Try Russel motors.

[David Samways]

I think the M20 used a round section spring, but I'll check it out. Thanks

[David Samways]

Just checked - the M20 spring is round section and 2.3" long. Not sure about other dimensions, but the length rules it out.

[David Samways]

My local spring maker (Alberta Springs) tells me that rectangular section spring wire is now extremely difficult to find. The good news is that we reckon a slightly weaker round section spring will do the trick. At a cost of about thirty quid, I'm willing to give it a go and if successful Graham can make them to order.

David

[HasseC]

Hi David!

Did You find a spring? I may have one extra.

Hans

[David Samways]

Hi Hans, I'm getting one made in round wire, but if you have a spare I could be interested.

David