Victor Special wiring query

[Millerboy]

Hi
I am rebuilding a 1970 Victor Special (coil ignition, no ammeter, handlebar mounted combined dipswitch and horn button. I have what seems the correct wiring diagram, a new lucas loom and new correct spec. ignition and separate three way toggle lighting switch. However the terminals at the rear of each switch appear unmarked so I need guidance as to which wire attaches to which terminal for both switches. Help please.

Many thanks

[Spaceman]

I would be surprised if the switch terminal numberings are not marked but, since the wiring diagram gives the terminal connections for each switch position, it should be just a question of getting out the ohm-meter and checking which terminals are connected to each other and correlating this with the diagram.

[Millerboy]

Hi

I took a second detailed look at both switches. With a magnifying glass I could see the numbers on the light switch so that one is solved. No markings on the ignition switch but as it is just a simple on/off with two spades to each terminal it was easy to work out from the wiring diagram. So problem solved and thanks spaceman for responding.