A10 rocker box.

[TTJOHN]

Dave,

cancel that< have found how to do it.

Kind regards John

[DAVE BRADY]

Hi John,

The photos in your post are fine.  Did you use any sealant or just metal to metal?

Dave.

[TTJOHN]

Hello Dave.

Just a bit of grease, to help hold the small ones in place, hope you understand how I bent the comb to allow me to get the moles on it,  and the moles are the ones with flat jaws, normally used for welding.

John

[DAVE BRADY]

Hi,

It just so happens that I have never used the 'comb' when fitting a rocker box.  I do have one somewhere but always found it a pain to use and it always messed up the gasket goo.  One advantage of the copper gaskets with a bit of grease is that if they move a bit they can but just slide back in to place.
If you are going to the Awards Dinner take a set with you for me.

Dave.

[TTJOHN]

Hello Dave.

Okay mate, will do. See you there.

John

[Dean Southall]

I have fitted solid copper gaskets to the rocker boxes on both my A10s (ally head) but am going back to paper due to poor sealing.