Struggling to find a few parts for the engine rebuild

[Bigmac]

So far the rebuild has been going fairly well, but have had real issues sourcing a new rocker assembly (found a lot of spindles) and also a gear change quadrant  (preferably one that's on the shaft)

Appreciate any ideas for the best (and cheapest) to source these?

[idie]

It would help if we knew what engine.

[DAVE BRADY]

Hi Bigmac,

Assuming it is for an A50/A65, BritishBikeBits have some NOS rockers and there are a few suppliers of gear change quadrants come up in a google search.  I would suggest trying to get NOS parts if possible.  If you can go for quality over price as cheap usually means just that.  Are you intent on new parts?

Dave. 

[Mike Farmer]

 

PM sent

Mike

[Bigmac]

Yeah sorry its an A65 thunderbolt 1966, looks like it came with a lightning head as I can see two carb ports, I am fine with old parts but I know the quadrants get quite worn.

I have cobbled together all the bits that came in a baskets just used new washers and bearings where needed.

Need a clutch connector as well.