A65 Rocket 1963/4

[Cmcl.1959]

Hi, has anyone fitted indicators to an early bike like this?
I don't see an issue with the front, fitting them to the headlight via the brackets, but there's not much scope at the rear as far as I can see without making a bespoke bracket.
Anyone have any advice?


Thanks
Clarke

[Mike Farmer]

 

I used a piece of 10mm tube and fitted it straight across the top of rear No plate. Fed the wires through and put indicators on the end. The indicators had 10mm fixing holes/clamps.

Mike

[Cmcl.1959]

Thanks. I had thought of drilling holes in the number plate holder, but not wide enough so a tube across is probably the best way to go. Should be able to make something up.


Clarke