1958 A10 Handlebar lever layout

[MJM_58SR]

Hi all
I wondered if anyone could tell me how the handlebar levers were set out on a 1958 super rocket please.
I have an old photo of my bike as original and for the left side I can make out the clutch lever without ball end, a longer mag/choke lever with a ball end and I think the horn on the back of the lever. The engine cut out looks to be on the left hand side halfway down the bars.
For the right side I can't make out the brake set up and wondered if this was a combined lever and choke? In the photo the choke has a ball end and the arm has quite a steep angle.
I'd like to get it somewhere near if I can.
Any ideas?
Thanks

[geraldhattrick75]

Might this help at all?
https://www.yesterdays.nl/product/bsa-1958-a10-super-rocket-650cc-2-cyl-ohv/

[MJM_58SR]

Hi
Thanks, I'm not sure if that's original or not but I have seen that before, nice looking bike.
This is the photo of the bike when it was original, I can't see the left side clearly and the original photo isn't that clear either.

[Alan]

Hi Martyn,

Is this any help?

https://doc-0o-40-docs.googleusercontent.com/docs/securesc/d5lqdj53ir9u4ff66gktifs8dkkjhuuk/mm59hiboid1r5gd71bkad3onb4qqb21c/1620802425000/07327064509148742314/05550984263318519551Z/15gzHNhB6sOfqMyALdVAuio3GPfYqjqqo?e=download&nonce=2jj965cj1om44&user=05550984263318519551Z&hash=bpotfeatjqfoaska796jqak7bjue474l

If link doesn't work - bsa-info.nz  instruction book.

Alan

[MJM_58SR]

Thanks Alan

[Pete A10]

Attached layout from 1958 User manual. Only refers to Road Rocket not Super Rocket so there might be some differences