Centre stand.

Started by Barnsey, 08 Nov, 2026, 14:25

Previous topic - Next topic

Barnsey

#15
Is is definitely easier to route the speedo cable if the drive is over the hub. The previous owner had trouble routing the cable and it ended up melting on the exhaust.  Mind you he left out the spacers between the engine and frame too, which didn't help.

There is a lot of irony in this.  I have a bike which cast me £2600 and has taken 3 years to get it close to ride-able. My second bike cost me £1500 and just needed a new rectifier and the spark plug tweeking.  Not as pretty but mechanically just as good.   There must be a lesson in this. 

rhyatt

#16
The speedo cable goes along inside the pillion footrest bit of frame , along under the engine by the 2 oil pipes , then up the front frame downtube and under and into the headlamp assembly.
Squeezing between bottom yoke and clamp cowl