Gasket

Started by Richardson, 19 Sep, 2020, 17:14

Previous topic - Next topic
Print
Go Down Pages1
User actions

Richardson

19 Sep, 2020, 17:14
Hi, can anyone say what thickness the gasket should be between the carb and manifold on my A10 G/F 1953 plunger I am using an Amal 276, cheers Rich

idie

#1
19 Sep, 2020, 17:47
Usually a gasket about 1/8 inch is enough. It is there to help with stopping heat transfer into the carb.

Bess

#2
19 Sep, 2020, 20:13

Richardson

#3
20 Sep, 2020, 10:58
Thanks for replies, regards Rich
Print
Go Up Pages1
User actions