Back to not starting

Started by Barnsey, 08 Nov, 2026, 14:30

Previous topic - Next topic

Barnsey

Last week my No 2 bike was starting first kick.  I swapped the coil with that from my other bike, which is physically smaller.  This is because I wanted the bracket to use in a 12V conversion on No 1 bike. 
Now No2 won't start!  I have checked the spark, which is very strong, and I tried starting it with Easystart, but no go.  The battery is now on charge, but I really don't think iot is that, since the spark is so good.  Any ideas?

Barnsey

Okay, I just had a back fire.  Lucky it was Fireworks night last night.

But it made me wonder if swapping the coil can change the timing? 

Barnsey

I found the answer. When I swapped the coils over, I should have swapped the spark plugs too. It seems that the plug needs to be matched to the coil.   

Derek996

Quote from: Barnsey on 08 Nov, 2026, 15:23 I found the answer. When I swapped the coils over, I should have swapped the spark plugs too. It seems that the plug needs to be matched to the coil.   
Never heard of that before!
1948 BSA ZB32 Competition
2015 Ducati Scrambler Classic

limeyrob

What EXACLTY did you swap over?  The first thing to do is swap it back exactly as it was and confirm that the swap has or has not got anything to do with the current problem.

Barnsey

It started just fine, when I took out the B6ES plug and put in the B8ES plug which was originally with that coil on the other bike. Neither plug has a resistor.  I guess it could be a small difference in the plug gap. 

So, just to summarise, when I swapped the coil and lead, from bike 1 to bike 2, I should have swapped the B8ES plug too. 

  Weird or what!?