C15 clutch plate thickness

[DAVE BRADY]

Good morning,

Has anyone found that a nice new set of friction plates make the 'stack' of plates a bit too thick?
Result is last plane plate is very close to the edge and it is impossible to get the spring screw adjusters to start on the thread.

Dave.

[TTJOHN]

Sometimes pattern parts are not the same as the original and may be thicker, try reducing the amount of plates to suit.

[DAVE BRADY]

Hi John,

There are only 4 to start with.  The used ones are a bit thinner but that could be wear although they do not look that worn so perhaps mix of used and new will do it.

Dave.

[DAVE BRADY]

Hi,

I ended up putting the used ones back in and it was just that bit easier to get the new springs in so I now have some in stock for future use.

Dave.