A10 rear wheel spokes

[fenderman!]

I'm respokeing my back wheel..The part numbers are 67-6016 and 67-6017..They look identical although they as listed as near side and offside..They are a straight spoke and I cant tell them apart..I grouped them together to get polished,now I'm not sure how to tell which ones go where.

[MJM_58SR]

Looking at another thread, there is a measurement given as 67-6017 Length 7 27/32" and 67-6016   Length  7  29/32"
I'm no expert but maybe you could try lacing the wheel, if you took the offset measurement etc before stripping then you will be able to tell if you have got it right.

[Spaceman]

I believe you are referring to an A10 with a crinkle hub which I think has straight spokes - that is, they do not have a bend at the inner end. If so, the only difference between the inner and outer spokes could be their length - that said, a difference of 1/16" is neither here nor there when it comes to wheel building. If the spokes had bends then, if you can't see an obvious difference between them, it won't matter when you rebuild the wheel.