Print Page - Gasket

Title: Gasket
Post by: Richardson on 19 Sep, 2020, 17:14

Hi, can anyone say what thickness the gasket should be between the carb and manifold on my A10 G/F 1953 plunger I am using an Amal 276, cheers Rich

Title: Re: Gasket
Post by: idie on 19 Sep, 2020, 17:47

Usually a gasket about 1/8 inch is enough. It is there to help with stopping heat transfer into the carb.

Title: Re: Gasket
Post by: Bess on 19 Sep, 2020, 20:13

Hi,
This one:

http://amalcarb.co.uk/mk-i-spigot-flange-gasket.html

Best wishes...

Title: Re: Gasket
Post by: Richardson on 20 Sep, 2020, 10:58

Thanks for replies, regards Rich

BSA Owners' Club Workshop Discussions