is this strange i seem to have a threaded tube between my bearing cups im trying to remove them i have a set of normal cups any ideas thanks paul
Sounds a bit odd but would help if you posted some photos.
the bearing cups themselves are threaded to aid removal with the special tool. You are not confusing this with a tube are you?
Quote from: Pete C on 09 Aug, 2020, 10:05
the bearing cups themselves are threaded to aid removal with the special tool. You are not confusing this with a tube are you?
i think you are rite do you know where i can get the tool or a bolt with this thread
pic
I think I got mine from C&D. It was a while back though.
1.5 inch diameter and 24 TPI. You screw it in and belt it with a drift through the steering head.
(https://i.ibb.co/C1xK2sG/steering-race-extractor.jpg)