Text only | Text with Images

BSA Owners' Club Workshop Discussions

The BSA Workshop => Twins => Topic started by: Richardson on 12 Jul, 2020, 10:05

Title: Stud thread size
Post by: Richardson on 12 Jul, 2020, 10:05
Hi,
         Would anybody know the size thread etc used for '53 A10 plunger Crankcase and exhaust pipe lug stud, Great if you could, thanks Rich
Title: Re: Stud thread size
Post by: Ian C on 12 Jul, 2020, 11:12
I did a bit of research Rich and came up with 3/8" x 26 x 6 7/8". BSA part no. 67-1251.. Does this sound about right?
Title: Re: Stud thread size
Post by: Richardson on 12 Jul, 2020, 13:41
Spot on Ian thanks for info, Rich
Text only | Text with Images