Print Page - Mounting of Speedo and Tach for A10

Title: Mounting of Speedo and Tach for A10
Post by: MJM_58SR on 04 Jun, 2020, 10:18

Morning all
Would anyone be able to post a photo or give me details of the mounting of the speedo and tach on a super rocket please
I see the parts books show 8 rubber bushes but I'm not sure where they fit as it's not that clear from the parts books.
Any help appreciated
Thanks

Title: Re: Mounting of Speedo and Tach for A10
Post by: Bess on 04 Jun, 2020, 10:49

Hi,
Hope this helps:

Title: Re: Mounting of Speedo and Tach for A10
Post by: MJM_58SR on 04 Jun, 2020, 10:59

Thanks Bess
It certainly does, didn't want to damage my newly restored bits!
Regards
Martyn

Title: Re: Mounting of Speedo and Tach for A10
Post by: MJM_58SR on 13 Jun, 2020, 16:28

Hi Bess
Can you let me have the measurements for the rubber bushes please, I've got some bit they look a bit on the large side!
Martyn

Title: Re: Mounting of Speedo and Tach for A10
Post by: Bess on 13 Jun, 2020, 17:54

Hi Martyn,
If you have part number 15-7383, they are 7/16" x 3/16" x 1/4".

I am aware some suppliers are offering a set of 4 and you need to cut them in half, obviously you can get some rubber hose with similar dimensions and cut your own. Hope this helps.

Regards...Bess

Title: Re: Mounting of Speedo and Tach for A10
Post by: MJM_58SR on 13 Jun, 2020, 19:43

Thanks Bess
The ones I've got are an inch deep. 15/16 across
Obviously I've been turned over!
Ah well not to worry, learning curve...getting a bit fed up with idiots advertising stuff they don't actually know about.
Anyway ive got the measurement now so I can get sorted!
Thanks
Martyn

BSA Owners' Club Workshop Discussions

The BSA Workshop => Twins => Topic started by: MJM_58SR on 04 Jun, 2020, 10:18