Print Page - Rear shock strip

Title: Rear shock strip
Post by: waley on 09 Apr, 2020, 15:08

Hi , could somebody let me know the best way to remove the split collets on my rear shocks. I just need to remove the spring to spray the damper. Thank in advance

Title: Re: Rear shock strip
Post by: bikerbob on 09 Apr, 2020, 15:17

There is a special tool for compressing the spring if you look at service sheet No. 313 it shows you a picture of it in use. If you are handy it is quite easy to make one. A copy of the service sheet can be found in the library service sheets in the members section

Title: Re: Rear shock strip
Post by: waley on 09 Apr, 2020, 15:21

Thanks bob, I'll take a look

Title: Re: Rear shock strip
Post by: waley on 09 Apr, 2020, 15:51

Bob, excuse me for being a little thick here. But I've looked in the service sheets in the members area under unit twins and there doesn't appear to be a sheet 313

Title: Re: Rear shock strip
Post by: Bess on 09 Apr, 2020, 17:48

Hi,
Here it is:

Title: Re: Rear shock strip
Post by: waley on 09 Apr, 2020, 20:54

Thats great, thanks for that

Title: Re: Rear shock strip
Post by: bikerbob on 10 Apr, 2020, 16:15

Waley just checked and there is a service sheet 313 it comes after 311 in the list

Title: Re: Rear shock strip
Post by: Talisker on 14 Apr, 2020, 20:35

Waley
I got one off flea bay £18 if you are in Kent and times where different you would be welcome to a lend.
Regards Jim

Title: Re: Rear shock strip
Post by: waley on 16 Apr, 2020, 13:50

Talisker.. thanks appreciate the thought

BSA Owners' Club Workshop Discussions

The BSA Workshop => Twins => Topic started by: waley on 09 Apr, 2020, 15:08