Print Page - 1949 b31 gear lever

Title: 1949 b31 gear lever
Post by: DEDGE on 06 Feb, 2020, 17:06

Hi All
Brought a new gear change lever from Dragonfly. The old one was 5 inchs from the centre of the spline to the centre of the bar, don't know if this was the original one, but the new one is only 3 5/8 inches. Does anyone know the correct dimensions. It's for a 1949 b31 plunger.
All the Best
Dedge

Title: Re: 1949 b31 gear lever
Post by: Jim S on 06 Feb, 2020, 19:06

I have a 1949 B33. I just measured the gear change lever. About 5 1/8 inches.

Jim

BSA Owners' Club Workshop Discussions

The BSA Workshop => Singles => Topic started by: DEDGE on 06 Feb, 2020, 17:06