Hi All, I'm after some information about a friend's clutch pressure plate on his A7. It's badly warped and i'm after a replacement but can't seem to match it. His looks like a steel clutch plate spot welded to the pressure plate so has the drive splines inside which locate on the basket. All others I can find don't have this drive. Is it needed or will any 6 spring A&/A10 pressure plate work work? Thanks, Ben
You do not say wether the A7 is plunger or swinging arm. According to my parts book the swinging arm plate is called "clutch actuating cap"and is part number 42-3056. If it is a plunger model then it is called "clutch spring plate" and is part number 67-3245. both are six spring clutches and with different part numbers I would suspect that they are not interchangeable.
Ah sorry, it is a plunger model. Thanks for the info, I have a swinging arm A10 so may pull it apart to compare as struggling to find a match for the A7 anywhere. Ben
Type the following number into ebay and I think this is what you are looking for you could contact the seller and make him an offer to take it off the auction. 201915096291