Hi,1965 B40,6 volt pos earth.This bike has always been a pig to start .As it happens it came with an unused Boyer induction discharge kit ,So I thought to fit it .Only 4 wires plus disconnect the condenser on the c.b assembly.Now the condenser forms part of the cb assy the cb return spring geing tensioned by it.Now I have taken the condensor out of the housing like a fool .I need to put it back to secure the cb spring but have forgotten how the spring + connector fromm the coil fit together on the end of the condenser,insulating washer etc .When I get that sorted I might get a spark.Haynes manual ,,no photos