I have rebuilt a C12 1958 model from scratch but some of the parts were missing. My problem at the moment is that I need to know the size of the spacer between the engine plate and the inside of the primary case. Have tried rectifying the problem myself with washers but the final drive chain still seems to catch/rub of the back of the chain case. I think it needs adjusting to come out more but I do not know by how much. Any help would be appreciated.
Thanks, Joe
whats the part no Joe
Part number is 29-7545
Joe
29-7545 is referenced on the link below as being 39mm long
https://bsac10c11c12.co.uk/smf/technical/footrest-rod-distance-tube/
hope this might help plus have attached a fasteners database which I often find useful.
Clive
Hi Clive,
Thanks very much for your help and prompt reply. I'll take this on board and let you now how I get on. Thanks again.
Joe
Hi Clive Dackus,
I have just come across the fasteners database. In the introduction it mentions "Stainless Bits" and this suggests that it is a web-site that sells stainless fasteners - do you know whether this is still trading as I have tried searching and can't find anything that might be a link to this. It was the Aerospace hardened stainless list that I was looking for - If you can help, thanks,
Kevin
Sorry Kevin but when I originally found that list it was on the website of a defunct company. Cannot remember the name but would imagine it was Stainless Bits.