BSA Owners' Club Workshop Discussions

The BSA Workshop => Twins => Topic started by: royblackburn1@btinternet. on 22 May, 2019, 15:06

Title: Starting hot engine
Post by: royblackburn1@btinternet. on 22 May, 2019, 15:06
Hi all, any hints on starting a hot engine, the engine starts up second kick when cold and idles ok air screws are one and a half turns out on each carb, but it don't like starting up when hot.thanks Roy
Title: Re: Starting hot engine
Post by: A10 JWO on 22 May, 2019, 16:25
Check the mixture screw is adjusted correctly, when was the last time the Amal had a good clean out. Try some NGK's as well. Won't be much wrong  ;D
Title: Re: Starting hot engine
Post by: royblackburn1@btinternet. on 23 May, 2019, 10:44
Thanks for reply will have a go. Roy
Title: Re: Starting hot engine
Post by: EDDIE SIMPSON on 29 May, 2019, 00:33
My Maggie hates restarting when hot also. I wish I knew why. However I found if you swop the plug leads and kick over until the exhaust pops, then swop back, it starts. Why?