Hi folks
Has anyone repaired the centre stand lugs ?
It had the appearance of cast iron ??
Both lugs snapped off
silver solder should fix it.
You must get the parts near to red hot, flux on the joint and feed in the solder, it should run into the joint easily.
Mick
Not sure what you mean by lugs. I welded up my centre stand itself as I needed to repair it. No problems with my mig welder.
Quote from: MICKREEVES on 17 May, 2019, 07:16
silver solder should fix it.
You must get the parts near to red hot, flux on the joint and feed in the solder, it should run into the joint easily.
Mick
silver solder ? really ? will that be strong enough for a centre stand :-\
mind you, I have trouble with glueing things..