:) :) :) :)
Greetings
What is the diameter of the tie bolt that goes through the lower engine mounting. I have a book that says 7/16 and one that says 5/16. But it will take 10mm which suggests 3/8.?????????
So your help and advice again please.
Mike 8) 8) 8)
Mike
Don't confuse things, I think the reason why there is two different sizes is that the centre is 7/16" blank but reduced & threaded on the ends to 5/16" start using metric and you could get yourself banned and, having to buy the drinks all round at the open day, I'm on rum. ;D ;D ;D ;D
TTJohn
Hi Mike, Depending on the year of manufacture of an A10 Golden Flash there are two part numbers for the item in question. 27-6276 and 42-4099. However, checking the fixings list both are 3/8" diameter with a cycle thread. Hope this helps.
:) :) :)
Thanks for that. Don't fret I can 'do' metric and imperial on the run. Sorry cant afford to buy my own drinks even.
TC
Mike 8) 8) 8)