Hello,
Could someone please email me a picture of the mounting bracket that holds the speedometer into a 1961 A10 nacelle.
I do not have any studs on the back of the speedo. to hold a bracket and the previous owner has used a rubber ring normally associated with the "divers helmet" type. Have I got the wrong speedo?
Any help much appreciated.
Rich
richardatpoole@aol.com
Hi,
The chrono speedo has two studs for a u-shaped bracket. The studs and nuts have a tendency to seize together so people pull the studs from the speedo to release it. This might help with bracket making, steps 13 and 14:
https://www.motorcycleclassics.com/mc-how-to/install-a-smiths-digital-speedometer
The speedo number should be SC.3305/04.
Best wishes...
Many thanks,
As soon as it stops raining I shall head down to the workshop to check this out.
Thanks again,
Rich