Print Page - c11 primary case oil quantity

Title: c11 primary case oil quantity
Post by: elevensies on 26 Feb, 2019, 08:45

just getting the c11 ready for use, and new oil in and fuel, but, for the life of me i cant recall how much oil to drop into the primary

iv put in about 50ml of gear oil (80/90 mineral) through the case, i just dont know if thats enough, or too much, i didnt write it down in my little book.

i know engine oil or ATF oil or even just chain lube works, i just had some gear oil left from filling the gear box,

thanks

Title: Re: c11 primary case oil quantity
Post by: Crashtestdummy on 02 Mar, 2019, 21:01

Hi I fill mine to the level plug seems to work.
Andy

Title: Re: c11 primary case oil quantity
Post by: elevensies on 03 Mar, 2019, 10:17

thanks Andy, do you know how much approx that is please?

only reason i ask is i have a clutch / gearbox issue thats just arose where i cant engage the clutch to select a gear, the actuator arm is flopping around, so

im going to strip it and see

BSA Owners' Club Workshop Discussions

The BSA Workshop => Singles => Topic started by: elevensies on 26 Feb, 2019, 08:45