:) :)Hi all
A quick couple of questions for you to mull over if you would.
Referring to the enclosed photo. I know the bolts on the rear of the clutch basket should be wire locked but I cant find a definitive answer to whether they have washers under them. I'm aware space back there is very limited and don't want to get this wrong.
Second question Where can I get the "wire lockable" bolts.
Your input greatly appreciated
Mike 8) 8) 8)
Hi Mike,
No washers required and have you tried SRM, they are oos but a phone call might turn some up.
http://www.shop.srmclassicbikes.com/product/clutch-rollers-retainer-bolt-early-4-spring-clutch
Best wishes...
Hi Bess :) :) :)
Thanks for that.
Yes Tried SRM and although they advertise them they are out off stock and "nothing ordered". So I'll carry on looking. Its a long way off the point of needing them for this particular job so no problem. What thread are they.
Mike 8) 8) 8)
Hi Mike,
2 BA 1/2" long. Plenty on ebay that need drilling ;)
Regards...
:) Hi Bess
Thanks agen.
Mike 8) 8) 8)
easy enough to drill 1/16 or 2mm diameter hole either through the head or across a corner if you take it steady with a drop of oil. as I remember, no washer as can with a bit of run out rub mating parts
:)
Brill. Just done the first couple earlier this morning. Waiting for other bolts to arrive. Don't think I'll take it up as a hobby.
Mike 8) 8) 8)