Hello
I am in the process of trying to modify a (what i am told) is a 250 Round tank back wheel. My problem is i can't get the rear sprocket off. I can undo the locking nut but am unsure if the rear sprocket is either threaded on so needs unscrewing or is just a rusty tight fit on the hub.
(https://scontent-lht6-1.xx.fbcdn.net/v/t1.0-9/46970626_10215656901168022_2461739030589472768_n.jpg?_nc_cat=105&_nc_ht=scontent-lht6-1.xx&oh=edbf2271e9715271aab7192b595a6f4a&oe=5CAE2E24)
can anyone help?
Cheers
Hi there
Just had a look at my round tank wheel (1925).
Yours is very very similar. But not from a round tank.
The spoking is very similar indeed. But slightly different.
The rear sprocket on a round tank is held on with 6 nuts and bolts.
Your sprocket looks too big too.
I'll try to attach a photo of mine for you.